Fiberglass Triaxial Fabric | Multiaxial Reinforcement

Fiberglass Triaxial Fabric

Fiberglass Triaxial Fabric

POLEMA's fiberglass triaxial fabric is a premium multiaxial reinforcement engineered for extreme multi-directional strength. Featuring direct rovings precisely aligned in three intersecting axes (typically 0°, +45°, -45° or +45°, 90°, -45°) and stitched without chemical binders, it provides exceptional torsional and longitudinal rigidity. It is the ultimate structural backbone for wind turbine blades, boat hulls, and pultruded profiles.

Model:X600

WhatsApp Now

Fiberglass Triaxial Fabric (0°/+45°/-45° or +45°/90°/-45°)

Fiberglass Triaxial Fabric, a highly advanced multiaxial reinforcement, is constructed to absorb heavy mechanical loads from multiple directions simultaneously. It is manufactured by aligning fiberglass direct rovings strictly parallel in three specific directions—either the longitudinal triaxial (0°, +45°, -45°) or the transverse triaxial (+45°, 90°, -45°) configuration. These three distinct layers are then securely stitched together using high-tenacity polyester yarn.

To further enhance its interlaminar shear strength and surface finish, this triaxial fabric can be customized by stitching it together with a chopped strand layer to form a heavy-duty combo mat. Delivering extremely rapid wet-out and flawless compatibility with Polyester, Vinyl Ester, and Epoxy resin systems, this material is indispensable in the wind energy sector, high-performance marine boat building, automotive structural parts, sports equipment, and industrial containers. It exhibits superior formability and mechanical performance in Vacuum Infusion, hand lay-up, pultrusion, and RTM (Resin Transfer Molding) processes.

General Specifications

Code	Total Weight (g/m²)	0° Layer (g/m²)	+45° Layer (g/m²)	90° Layer (g/m²)	-45° Layer (g/m²)	Chop Layer (g/m²)
X600	600	300	150	-	150	-
X750	750	300	225	-	225	-
X900	900	300	300	-	300	-
X1200	1200	700	250	-	250	-
XA1200/300	1500	700	250	-	250	300
TX750	750	-	200	350	200	-
TX900	900	-	225	450	225	-
TXA1200/300	1500	-	250	700	250	300

* Remark: Custom area weights and layer combinations (including additional chopped strands) are available to match specific engineering requirements.

Instructions for Use & Storage

Roll Width: The standard widths are 1250mm and 1270mm. Custom widths ranging from 200mm to 2600mm are available to optimize your layup process and minimize waste.

Packing: The triaxial fabric is firmly wound onto a 76mm ID paper core, wrapped with moisture-proof plastic film, and packed in durable cartons for horizontal pallet shipment.

Storage: Keep the product in a dry, cool, and water-proof indoor area. We recommend maintaining temperatures between 15°C and 35°C, with relative humidity at 35% to 65%.

Why Partner with POLEMA?

Multiaxial Engineering

We don't just supply fabric; we engineer structural solutions.

Flexible Architectures: Choose between Longitudinal (0/+45/-45) or Transverse (+45/90/-45) designs.
Custom Combos: Add chopped strand layers to increase interlaminar adhesion.

Strict Quality Assurance

Every roll is subjected to rigorous laboratory testing before it leaves our facility.

Testing Metrics: Tested for multi-directional tensile strength, rapid wet-out, and moisture control (≤0.2%).
Traceability: Barcode tracking ensures 100% production traceability.

Global Shipping & Supply

We understand that uninterrupted supply is crucial for your factory. We offer flexible commercial terms to support your inventory.