Low Shrinkage Artificial Resin Overview

This product is an unsaturated polyester resin specifically formulated for artificial stone and natural stone applications. It is designed for use in solid surface materials, quartz stone, engineered stone, and marble—including repair work and casting processes—and offers key advantages such as low shrinkage, high gloss, high hardness, ease of polishing, and resistance to yellowing.

The resin exhibits excellent flow properties, rapid de-aeration, and superior self-leveling characteristics. It demonstrates outstanding compatibility with stone powders and aggregates; once cured, the resulting material features a dense structure that is free of pinholes, resistant to cracking, and dimensionally stable. The surface possesses a high degree of gloss, and after polishing, the texture closely resembles that of natural stone. Furthermore, the product offers excellent resistance to abrasion, oil stains, and aging; it resists yellowing and fading over prolonged periods of use, while ensuring strong adhesion and reliable structural integrity.

PLM-770 by POLEMA is an advanced low shrinkage artificial resin specifically engineered for continuous production of large-format quartz and engineered stone slabs. As a leading manufacturer, we deliver this high-strength artificial resin with superior curing stability to ensure your slabs remain flat, crack-free, and highly lustrous after polishing.

Core Performance Advantages

Low Shrinkage, High Stability

Exhibits a low curing shrinkage rate; slabs remain free from cracking and deformation, ensuring exceptional flatness.

Ideal for Large-Format Slabs

High Hardness, High Gloss

Possesses superior hardness and is easy to polish, yielding a surface finish as lustrous as natural stone.

Weather-Resistant and Non-Yellowing

Highly resistant to aging and oil stains; retains its original color and does not yellow even after prolonged use.

Excellent Processing Adaptability

Features excellent flow properties and rapid de-foaming; demonstrates strong compatibility with powder fillers, resulting in high molding efficiency.

High Cost-Effectiveness

Offers outstanding value and is a best-seller in markets including Vietnam, Thailand, Turkey, Mexico, and the United States.

Low Shrinkage Artificial Resin Specifications

*Gel time at 25℃: Add 0.9 g special accelerator (1% Co) and 0.9 g special curing agent to 50 g resin.

Cast Resin Properties (Typical Values)

*Curing Conditions:Cure at room temperature for 24 hours,post-cure at 40°C,60°C and 120°C for 2 hours each.
Test Conditions: Temperature 23±2°C, Relative Humidity 50±6%.

Liquid Resin Properties (Typical Values)

Low Shrinkage Artificial Resin Application

FAQ

Instructions for Use and Storage Conditions

PLM-770 resin contains no accelerator. Appropriate amount of accelerator and curing agent shall be added during use according to operating environment and requirements.

To prevent the natural molding surface in contact with air from being sticky after curing, add paraffin-styrene solution properly.

For better product performance, post-curing at 80℃ for several hours is recommended.

Before use, store the resin in its original package (avoid opening or damaging the drum) in a dry indoor area below 25℃.

Elevated temperature and light exposure will significantly shorten shelf life. Keep away from direct sunlight and heat sources during storage.

Unsaturated polyester resin containing styrene is flammable. Keep away from open flames during storage. Refer to the Safety Data Sheet.